References

AASHTO, Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By Method (SIP), AASHTO TP 98-11, Washington, DC, May 2012.

Ahmed, A., M. A. Sharif, and K. Ksaibati, Developing an Effective Shoulder and Centerline Rumble Strips/Stripes Policy to Accommodate All Roadway Users, Wyoming Department of Transportation, Report No. FHWA-WY-15/02, April 2015.

ANSI S12.9/Part 3-1993 American National Standard Quantities and Procedures for Description of Measurement of Environmental Sound. Part 3: Short-Term Measurements with an Observer Present.

Balmos, A.D., J.K. Mathew, D. Plattner, J.V. Krogmeier, and D.M. Bullock, Evaluation of Sinusoidal Rumble Strip Noise Levels, TRB 96th Annual Meeting Compendium of Papers, Transportation Research Board of the National Academies, Washington, DC, January 2017.

Beranek, L., and I.L. Vér (eds.). Noise and Vibration Control Engineering: Principles and Applications. John Wiley & Sons, 1992.

Campbell, J.L., C.M. Richard, J.L. Brown, M.G. Lichty, J. Graham, and M. O’Laughlin, NCHRP Report 600C: Human Factors Guidelines for Road Systems, Transportation Research Board, 2010.

Donavan, P., Design and Acoustic Evaluation of Optimal Sinusoidal Mumble Strips versus Conventional Ground-In Rumble Strips, California Department of Transportation Report No. CTHWANP-RT-15-365.01.2, 2018.

Donavan, P.R., and D.M. Lodico, NCHRP Report 630: Measuring Tire-Pavement Noise at the Source, Transportation Research Board of the National Academies, Washington, DC, 2009.

Donavan, P., and B. Rymer, Comparison of Vehicle Responses to Rumble Strip Inputs of Varying Design, SAE International Journal of Passenger Cars - Mechanical Systems 8(3):2015, doi:10.4271/2015-01-2274. Paper 2012-01-0082, 2012, doi:10.4271/2012-01-0082.

Himes, S., and H. McGhee, Decision Support Guide for the Installation of Shoulder and Center Line Rumble Strips on Non-Freeways, Report No. FHWA-SA-16-115, FHWA, August 2016.

Himes, S., H. McGhee, S. Levin, and Y. Zhou, State of Practice for Shoulder and Center Line Rumble Strip Implementation on Non-Freeway Facilities, Report No. FHWA-HRT-17-012, FHWA, 2017.

International Organization of Standardization, Mechanical vibration – Measurement and evaluation of human exposure to hand-transmitted vibration – Part 1: General requirements, ISO 5349-1:2001, 2001.

International Organization of Standardization, Mechanical vibration and shock – Evaluation of human exposure to whole-body vibration – Part 5: Method for evaluation of vibration containing multiple shocks, ISO 2631-5:2018, 2018.

Mathew, J.K., A.D. Balmos, D. Plattner, T. Wells, J.V. Krogmeier, and D.M. Bullock, Assessment of Alternative Sinusoidal Rumble Stripe Construction (Joint Transportation Research Program Publication No. FHWA/IN/JTRP-2018/05). West Lafayette, IN: Purdue University, 2018. https://doi.org/10.5703/1288284316648.

Meinhardt, G., Z. Sun, and G. Steyer, “An Application of Variation Simulation—Predicting Interior Driveline Vibration Based on Production Variation of Imbalance and Runout,” Society of Automotive Engineers Noise and Vibration Conference Proceedings, Paper 2011-01-1543, Grand Rapids, MI., May 2011.

Rochat, J., C. Satterfield, B. Rymer, and P. Donavan, Highway Rumble Strips: Approaches to Balancing Public Safety and Community Noise, TRB Webinar, Transportation Research Board, Washington, DC, 2017.

Society of Automotive Engineers. Measurement of Interior Sound Levels of Light Vehicles, Recommended Practice. SAE J1477-2000. Warrendale, PA, 2000.

Society of Automotive Engineers International, “Surface Vehicle Recommended Practice – Ride Index Structure and Development Methodology,” SAE J2834, October 2013.

Smadi, O., and N. Hawkins, NCHRP Synthesis 490: Practice of Rumble Strips and Rumble Stripes, Transportation Research Board, Washington, DC, 2016.

Standard Practice for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method, T 360, AASHTO, Washington, DC. January 2016.

Torbic, D.J., J.M. Hutton, C.D. Bokenkroger, K.M. Bauer, D.W. Harwood, D.K. Gilmore, J.M. Dunn, J.J. Ronchetto, E.T. Donnell, H.J. Sommer III, P. Garvey, B. Persaud, and C. Lyon, NCHRP Report 641: Guidance for the Design and Application of Shoulder and Centerline Rumble Strips, Transportation Research Board of the National Academies, Washington, DC, 2009.