References

AASHTO. (2012). LRFD Bridge Design Specifications, 6th ed. American Association of State Highway and Transportation Officials, Washington, DC.

AASHTO. (2017). LRFD Bridge Construction Specifications, 4th ed. American Association of State Highway and Transportation Officials, Washington, DC.

AASHTO. (2020). LRFD Bridge Design Specifications, 9th ed. American Association of State Highway and Transportation Officials, Washington, DC.

AASHTO. (2024). LRFD Bridge Design Specifications, 10th ed. American Association of State Highway and Transportation Officials, Washington, DC.

Abrishami, H. G., and D. Mitchell. (1993). Bond Characteristics of Pretensioned Strand. ACI Materials Journal 90 (3): 228–235.

ACI Committee 318. (2011). Building Code Requirements for Structural Concrete and Commentary (ACI 318-11). American Concrete Institute. Farmington Hills, MI.

ACI Committee 318. (2014). Building Code Requirements for Structural Concrete and Commentary (ACI 318-14). American Concrete Institute. Farmington Hills, MI.

ACI Committee 318. (2019). Building Code Requirements for Structural Concrete and Commentary (ACI 318-19). Farmington Hills, MI.

ACI Committee 318. (2025). Building Code for Structural Concrete—Code Requirements and Commentary (ACI 318-25). American Concrete Institute. Farmington Hills, MI.

Al-Kaimakchi, A., and M. Rambo-Roddenberry. (2021). “Measured Transfer Length of 15.2-mm (0.6-in.) Duplex High-Strength Stainless Steel Strands in Pretensioned Girders.” Engineering Structur, no. 237, 112178.

Allen, D. E. (1992). “Canadian Highway Bridge Evaluation – Reliability Index.” Canadian Journal of Civil Engineering 19 (6): 987–991. https://doi.org/10.1139/l92-118.

Alonso, M. C., M. Sánchez, E. Mazario, F. J. Recio, H. Mahmoud, and R. Hingorani. (2010). High Strength Stainless Steel 14301 for Prestressed Concrete Structures Protection. 6th International Conference on Concrete under Severe Conditions (CONSEC 10) Mexico, pp. 1047–1054.

ASTM International. (2011). ASTM E139: Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials (reapproved 2018). West Conshohocken, PA.

ASTM International. (2012). ASTM D7337: Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars (reapproved 2019). West Conshohocken, PA.

ASTM International. (2013). ASTM E328: Standard Test Methods for Stress Relaxation for Materials and Structures. West Conshohocken, PA.

ASTM International. (2015a). ASTM A1081: Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand. West Conshohocken, PA.

ASTM International. (2015b). ASTM A1081/A1081M: Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand. West Conshohocken, PA.

ASTM International. (2017). ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes. West Conshohocken, PA.

ASTM International. (2018a). ASTM A416: Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete. West Conshohocken, PA.

ASTM International. (2018b). A580/A580M: Standard Specification for Stainless Steel Wire. West Conshohocken, PA.

ASTM International. (2020a). ASTM A1114: Standard Specification for Low-Relaxation, Seven-Wire, Grade 240, Stainless Steel Strand for Prestressed Concrete. West Conshohocken, PA.

ASTM International. (2020b). ASTM A1061/A1061M: Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand. West Conshohocken, PA.

Belarbi, A., M. Dawood, P. Poudel, M. Reda, H. Tahsiri, B. Gencturk, S. H. Rizkalla, and H.G. Russell. (2019). NCHRP Research Report 907: Design of Concrete Bridge Beams Prestressed with CFRP Systems. Transportation Research Board, Washington, DC.

Belarbi, A., and Nanni, A. (2022). Design of corrosion-free concrete structural elements using fiber-reinforced polymer and stainless steel reinforcements. ASPIRE: The Concrete Bridge Magazine, Summer 2022, 11–13.

Bridgetech, Inc., Tennessee Technological University, and D. Mertz. (2007). NCHRP Report 592: Simplified Live Load Distribution Factor Equations. Transportation Research Board, Washington, DC.

Clemeña, G. G., Kukreja, D. N., and Napier, C. S. (2003). Trial Use of a Stainless Steel-Clad Steel Bar in a New Concrete Bridge Deck in Virginia (Report No. FHWA/VTRC 04-R5). Virginia Transportation Research Council, Charlottesville.

Dassault Systèmes Simulia Corp. (2013). Abaqus Userʼs Manual, Version 6.13, Providence, RI, USA.

Dayton Superior, Prestress Handbook Concrete Construction Products Building Strength, 2022.

FDOT (Florida Department of Transportation) (2019). Design Standards Development Report for Corrosion Resistant Prestressed Concrete Piles, Index 22600 Series, FDOT Design Standards Development Report. Tallahassee.

FDOT. (2019). Standard Specifications for Road and Bridge Construction. Tallahassee.

FDOT. (2020). Structures Manual, Volume 1: Structures Design Guidelines. Topic No. 625-020-018. Tallahassee.

Hazard E. (2024). Prediction of Stress in Stainless Steel Strands at Flexural Strength. Masterʼs thesis, Florida State University, Tallahassee.

Kulicki, J. M., W. B. Wassef, D. D. Kleinhans, C, H, Yoo, A.S. Nowak, and M. Grubb. (2006). NCHRP Report 563: Development of LRFD Specifications for Horizontally Curved Steel Girder Bridges. Transportation Research Board, Washington, DC.

Mattock, A. H. (1979). Flexural Strength of Prestressed Concrete Sections by Programmable Calculator. PCI Journal, 24 (1): 32–54.

Mechaala, A., D. Stefaniuk, and A. Belarbi. (2024). Comparative Cerformance Analysis of Straight and Harped Prestressing Seven-Wire Strands: High-Strength Stainless Steel vs. Conventional Carbon Steel. Construction and Building Materials, no. 439, 137421.

Mechaala, A., D. Stefaniuk, and A. Belarbi. (2025). Flexural Behavior of Full-Scale AASHTO Type I Girders Prestressed with Stainless Steel Strands. Engineering Structures 333, 120160.

Mlynarski, M., W. Wassef, and A. Nowak. (2011). NCHRP Report 700: A Comparison of AASHTO Bridge Load Rating Methods. Transportation Research Board, Washington, DC.

Mitchell, D., W. D. Cook, A. A. Khan, and T. Tham. (1993). Influence of High Strength Concrete on Transfer and Development Length of Pretensioning Strand. PCI Journal 38 (3): 52–66.

Morton, C. (2018.) The Feasibility of High Strength Stainless Steel in Prestressing Applications for Pile Design. PhD dissertation, University of South Florida, Tampa.

Moses, F. (2001). NCHRP Report 454: Calibration of Load Factors for LRFR Bridge Evaluation. Transportation Research Board, Washington, DC.

Moser, R., B. Holland, L. Kahn, P. Singh, and K. Kurtis. (2011). Durability of Precast Prestressed Concrete Piles in Marine Environment: Reinforcement Corrosion and Mitigation-Part 1 (Project No. 07-30). Georgia Department of Transportation, Atlanta.

Moser, R. D., P. M. Singh, L. F. Kahn, and K. E. Kurtis. (2012). Durability of Precast Prestressed Concrete Piles in Marine Environment, Part 2 Volume 2: Stainless Steel Prestressing Strand and Wire (Report No. FHWA-GA-12-2012). Georgia Department of Transportation, Atlanta.

Moser, R. D., P. M. Singh, L. F. Kahn, and K. E. Kurtis. (2014). Recent Developments in High-Strength Stainless Steels for Corrosion Mitigation in Prestressed Concrete. Advances in Civil Engineering Materials 3 (1): 509–525.

Naaman, A. E., and Alkhairi, F. M., (1991). Stress at Ultimate in Unbonded Post-Tensioning Tendons: Part 1—Evaluation of the State-of-the-Art. ACI Structural Journal 88 (5): 641–651.

Nowak, A. S. (1999). NCHRP Report 368: Calibration of LRFD Bridge Design Code. Transportation Research Board, Washington, DC., p. 37.

Nowak, A. S., and M. M. Szerszen. (2003). Calibration of Design Code for Buildings (ACI 318): Part 1—Statistical models for resistance. ACI Structural Journal 100 (3): 377–382.

Oh, B. H., and E. S. Kim. (2000). Realistic Evaluation of Transfer Lengths in Pretensioned, Prestressed Concrete Members. Structural Journal 97 (6): 821–830.

Paul, A. (2015). Understanding the Role of Materials in the Durability of Prestressed Concrete in Marine Environments. Doctoral dissertation, Georgia Institute of Technology, Atlanta.

Paul, A., L. F. Kahn, and K. Kurtis. (2015). Corrosion-Free Precast Prestressed Concrete Piles Made with Stainless Steel Reinforcement: Construction, Test and Evaluation (Report No. FHWA-GA-15-1134), Georgia Department of Transportation, Atlanta.

Paul, A., L. B. Gleich, and L. F. Kahn. (2017). Structural Performance of Prestressed Concrete Bridge Piles Using Duplex Stainless Steel Strands. Journal of Structural Engineering 143 (7).

PCI (Precast/Prestressed Concrete Institute). (2023). Precast/Prestressed Concrete Bridge Design Manual, 4th ed. Chicago, IL.

PCI Strand Bond Task Group. (2020). Recommended Practice to Assess and Control Strand/Concrete Bonding Properties of ASTM A416 Prestressing Strand. PCI Journal 65 (6): 33–34. https://doi.org/10.15554/pcij65.6-06

Rambo-Roddenberry, M., and Al-Kaimakchi, A. (2020). Stainless Steel Strands and Lightweight Concrete for Pretensioned Concrete Girders (FSU Project No. 041063), Florida Department of Transportation, Tallahassee.

Ramirez, J. A., and B. W. Russell. (2008). NCHRP Report 603: Transfer, Development, and Splice Length for Strand/Reinforcement in High-Strength Concrete. Transportation Research Board, Washington, DC.

Schuetz, D. P. (2013). Investigation of High Strength Stainless Steel Prestressing Strands. Masterʼs thesis, Georgia Institute of Technology, Atlanta.

Shirahama, S., S. Fang, T. Kobayashi, and T. Miyagawa. (1999). Basic Properties of Duplex Stainless Prestressing Steel and Flexural Behaviors of Prestressed Concrete Beams Using the Tendon. Zairyo (Japan) 48 (10): 1199–1206.

Stefaniuk, D., A. Mechaala, and A. Belarbi. (2025). Transfer Length of Stainless-Steel Strands in Prestressed Bridge Elements: A Combined Experimental and Numerical Modeling Approach. Engineering Structures, no. 325, 119482.

Tadros, M. K., N. Al-Omaishi, S. J. Seguirant, and J. G. Gallt. (2003). NCHRP Report 496: Prestress Losses in Pretensioned High-Strength Concrete Bridge Girders. Transportation Research Board, Washington, DC.

Tahsiri, H., and A. Belarbi. (2022). Evaluation of Prestress Relaxation Loss and Harping Characteristics of Prestressing CFRP Systems. Construction and Building Materials, no. 331, 127339.

Tessema, E. (2006). The Effect of High Strength Concrete on the Bondability of Prestressing Strands. Oklahoma State University, Stillwater.

Troconis, B. C., S. R. Sharp, H. C. Ozyildirim, C. R. Demarest, J. Wright, and J. R. Scully. (2020). Corrosion-Resistant Stainless Steel Strands for Prestressed Bridge Piles in Marine Atmospheric Environments (No. FHWA/VTRC 20-R2). Virginia Transportation Research Council, Charlottesville.

VDOT (Virginia Department of Transportation). (2020). Manual of the Structure and Bridge Division, VDOT, Richmond.

Yan, M., Y. Yang, X. Li, Y. Bao, J. Sun, and B. Sun. (2021). Pretensioned Prestress Friction Losses Considering Contact Imperfection at Deviators in Prestressed Concrete Girders. Structure and Infrastructure Engineering 17 (12): 1639–1650.

Zia, P., and T. Mostafa. (1977). Development Length of Prestressing Strands. PCI Journal 22 (5): 54–65.